fortypoundhead.com

What are the commands to configure a subnet mask on a router and a default gateway on a router?

VB6Boy asked this question on 12/3/2011. It has been viewed 583 times, and is currently resolved.

Trying to learn something new with these Cisco routers I found on Craigslist!

Keywords:

Answer from FortyPoundHead on 12/3/2011

"IP routing must be enabled on voice gateways but a routing protocol is not required. A default gateway is suffice. Logging parameters may also need to be defined.

In config mode, enter the following commands:

ip address 192.168.14.2 255.255.255.0

ip default-gateway 192.168.14.1

ip route 0.0.0.0 0.0.0.0 192.168.14.1

Reference:



Recent Forum Posts

Malicious IP Checker Companion Tool
dwirch posted on August 12, 2017 at about 20:24 in Site News

Job Spammer: Steve Adams
dwirch posted on August 8, 2017 at about 7:44 in Spammers

New security implemented
dwirch posted on August 8, 2017 at about 6:43 in Site News

New security implemented
dwirch posted on July 23, 2017 at about 6:58 in Site News

Fold Code Manager into main KB?
VB6Boy posted on July 22, 2017 at about 14:42 in Site News

Fold Code Manager into main KB?
dwirch posted on July 22, 2017 at about 14:41 in Site News