Error Detection vs. Error Recovery

Posted On 2010-12-25 by FortyPoundHead
Tags: Networking Cisco Tutorial 
Views: 1588

Passing the CCNA, Intro, and ICND exam is all about knowing and noticing the details. Which makes perfect sense, since becoming a master networking administrator or engineer is also about noticing the details! One such detail knows the difference between error detection and error recovery. While the terms are sometimes used interchangeably, they are not the same thing.

Error detection is just that - error detection only. Two common error detection methods are found at the Data Link layer of the OSI model, the FCS (Frame Check Sequence) and CRC (Cyclical Redundancy Check). A mathematical equation is run against the data in the frame, and the result is sent along with the data. The receiver runs the equation again, but this time. If the result is the same, the frame is considered valid; if the result is different, the frame is considered corrupt and is discarded.

Note that the FCS and CRC do nothing in regards to retransmission. They are strictly error detection schemes.

For an example of error recovery, we look to the Transport layer, where TCP runs. TCP performs reliable delivery, and the reason we call it "reliable" is that TCP uses sequence numbers to detect missing segments. If the sender determines from the sequence numbers that the remote host did not receive transmitted segments, the sender will retransmit the missing segments.

The key to keeping the terms straight in your head is to remember that while both error detection and error recovery both detect problems, only error recovery does anything about it. It's also worth reading an exam question twice when you see either term!

About the Author

FortyPoundHead has posted a total of 1974 articles.

Comments On This Post

No comments on this post yet!

Do you have a thought relating to this post? You can post your comment here. If you have an unrelated question, you can use the Q&A section to ask it.

Or you can drop a note to the administrators if you're not sure where you should post.

Your IP address is:

Before you can post, you need to prove you are human. If you log in, this test goes away.

Code Links