How to Boost WiFi Signal

Posted On 2008-02-20 by FortyPoundHead
Tags: Networking Hardware Tip 
Views: 1641

Wireless routers typically have ranges of 100 feet or more, however there are many factors that can lower this range, making your signal and signal strength lower than you might like. Interference can be caused by metal, other signals and other devices that use wireless frequencies like cell phones and microwave ovens. There are many methods you can use to boost your signal strength.

  1. Check for interference
    • Replace devices in your home that can interfere with network traffic on the 2.4GHz frequency range. These devices include many cordless phones, microwave ovens, and the like.

    • Check your signal strength with these devices on and off to determine if they are the cause of your signal problems.

    • Buy a wireless network analyzer to track down the source of interference.

  2. Change your signal channel
    • Routers can broadcast on a series of channels, between one and eleven. Change to a channel that will allow your router a clear signal between other wireless networks.

    • Use a software utility to analyze which networks are using which channel.

    • Configure your system for an unused channel.

  3. Reposition your Router.
    • Raise the router up as far as possible to increase the effective broadcast range.

    • Move the router away from any metal including metal shelving, filing cabinets and similar common objects.

    • Move the router closer to the receivers, if possible.

  4. Raise your transmit power.
    • Check your router's documentation and configuration utility for the ability to change the Xmit power of your router: the amount of power it uses to transmit the signal. generally you can boost this number by up to 50mW, however you do risk overheating or damaging your router.

  5. Replace the Antenna.
    • Unscrew and replace the broadcast antenna on your router with a model that delivers more power. Not all routers allow for new antenna to be attached, but many do.

  6. Install a Repeater.
    • Purchase a repeater. A repeater is a piece of hardware that acts like a wireless network expander. The repeater takes the signal from your router and boosts it to increase the range.

    • Wireless repeaters are increasingly common and affordable and will probably be available in your local computer store, or on the Internet.

  7. Install a Wireless Amplifier
    • Purchase and attach a wireless amplifier, also known as a booster, directly to your router. A booster can be more affordable than a repeater as they only increase the strength of your existing signal, rather than the strength and range.

    • Use a bi-directional amplifier to increase both your inward and outbound speeds.

About the Author

has posted a total of 1974 articles.

Comments On This Post

No comments on this post yet!

Do you have a thought relating to this post? You can post your comment here. If you have an unrelated question, you can use the Q&A section to ask it.

Or you can drop a note to the administrators if you're not sure where you should post.

Your IP address is:

Before you can post, you need to prove you are human. If you log in, this test goes away.

Code Links